HOME > PRODUCT LISTS > MS series shock test machine

This machine is for the test of the product’s or packaging’s resistance to shock, it can be used for the shock test of conventional half-sine wave, postpeak sawtooth wave, and trapezoidal wave etc, to find out the shock wave and enegry that may be suffered by the product in real environment, then improve or optimize the product packaging structure systematically.

 

---

System overwiew

 ● MS series shock test machine is a fully-automatic shock test system based on windows operating system, with friendly control interface, the operator only needs to input the testing data, the system will automatically configure the parameters and control the machine, and complete the shock test precisely.
● It has the anti secondary shock brake device: shock table falls freely to the shock wave-shaped cushion, after a rebound, the hydraulic brake stops the movement of the piston, then the shock table is braked, will not shock for the second time.
● Damping device with high efficiency, for the big shock test machine, when the shock test is being performed, the instant shock force is very strong, such a damping device greatly reduces the shock to the ground, foundation is not needed, and it's easy to install.
● The shock height is set digitally, the shock table is automatically lifted to the set height, with high control accuracy, with good repeatability of the shock data.
● Configured shock measurement system, displays the data of shock force and waveshape instantaneously.
● High acceleration generator can be configured, for the small test specimen, requires shock test with high acceleration, fix the high acceleration generator on the table of the shock test machine, according to the shock kinetic energy transfer theory, the shock acceleration can be higher than the normal IS series shock machine, for the test specimens less than 200 x 200mm, the shock test index is: the peak of shock acceleration can be up to 5000-50000 m/s, acceleration can last for 0.2-1ms.